APDM 2010 Legislation SB1406

This special session looks at the 2010 Alternative Project Delivery Method (APDM) legislation, SB 1406.  Hank Traeger, who has authored the majority of the APDM legislation for Arizona, leads the participants through the changes and new requirments of the SB 1406.

Learn not only what is in the language, but how and why the new language came to be.

Topics to be covered:

• New Requirements for heavy rail and commuter rail facilities
• Addition to the definition of Horizontal construction
• Reorganization and clarification of statutory language
• Clarification on self-performed work
• New requirements for the "bundling" of CMAR and DB projects
• Strengthens the no "bid shopping" language
• New transparancy requirements
• Confirms authority for Title 48 entities to use Title 34 processes
• Requires compliance on effective date of bill

Common Elements of Contract Failure (and How to Avoid Them!)

The turnover rate for companies in the construction industry is high. This course identifies the ten key elements of contractor failure and shows you how to avoid them. Each element of failure is defined and illustrated by real world examples, and ways are discussed to avoid or minimize the risks involved. Dr. Tom Schliefer brings his brand of wisdom and pragmatism to the course as well as his experience. This survival guide should prove invaluable to the 1.4 million individual construction-industry businesses in this country. 

Construction IAQ Management for LEED Projects

Construction Indoor Air Quality (IAQ) Management for LEED Projects

Made possible through a strategic partnership with:

Green Ideas - Environmental Education

2 LEED BD+C Specific GBCI CE Hours

Identify the key IEQ credit requirements and strategies before, during and after construction, and review a detailed analysis of a LEED compliant Indoor Air Quality Management Plan that can be used to drive the achievement of all applicable IEQ credits. 

Module 1: LEED 2009 Updates

As an overview of the seven LEED Credit categories, this module identifies the two key categories for construction professionals. It highlights the updates to LEED for New Construction and the reference materials available for further research.

Module 2: Review of Key IEQ Credits

Focus on the specific Credits related to a Construction IAQ Management Plan. The focus is on IEQ Prerequisite 2 - Environmental Tobacco Smoke (ETS) Control, Construction IAQ Management Plan Credits (During Construction and Before Occupancy) and all Low-Emitting Materials Credits. The five SMACNA control measures for IEQc3.1 are discussed in detail with information on best practices and effective documentation.

Module 3: Roles and Responsibilities

Highlight the importance of understanding the roles and responsibilities of the Design and Construction Teams. Learn how to define specifications for LEED projects and how to address compliance issues. Understand the key items to consider in the subcontractor bid evaluation process.

Module 4: IAQ Plan Components

Explain the details of a Construction Indoor Air Quality Management (CIAQM) Plan and its critical components. Learn what all LEED-compliant plans should include and cover the basic elements essential to any well-defined plan, not just a LEED IAQ plan. Receive guidance on photographic documentation, and how to address scheduling considerations and strategies.

Energy Modeling for LEED Projects

Energy Modeling -

for LEED Projects

Made possible through a strategic partnership with:

Green Ideas - Environmental Education

1.5 GBCI CE Hours

Beginning with an introduction to Energy Modeling, this course delineates the need for a model and provides guidance for selecting the modeler. This is followed by an overview and comparison of various modeling tools such as DOE2 and Energy Plus and a comparison of energy use in different types of buildings. The course concludes with an overview of what to include in a LEED energy model and a sample energy analysis presentation.

Module 1: Energy Modeling: Why and Who

This module focuses on the role of the energy consultant throughout the energy analysis process. Understand the terminology and expectati ons of a building energy simulation and why it can reduce the risks of improper design; making energy simulati ons an invaluable tool for architects!

Module 2: Overview of Modeling Tools

Discuss common energy modeling soft ware such as DOE2 and understand the LEED 2009 Energy Modeling Requirements that must be met by these tools. Review a summary comparison of features with 3D model examples and visual outputs to further enhance your knowledge of energy modeling tools.

Module 3: What to Include in a Model

This module will help you understand the typical inputs required to create a good simulation, such as building envelope, fenestration, lighting controls and HVAC systems. Learn the steps needed to create an energy efficient building.

Module 4: Sample Energy Analysis Meeting 

This module will take you through a typical energy analysis meeting. Learn the basics from an example of a LEED energy analysis that includes building envelope, lighting and HVAC. Understand how the energy model relates to annual operating costs and see how it affects a LEED score.

Made possible through a strategic partnership with:

Green Ideas - Environmental Education

1.5 GBCI CE Hours

LEED for Specialty Contractors

LEED for Specialty Contractors

 Made possible through a strategic partnership with:

Green Ideas - Environmental Education

1.5 LEED BD+C Specific GBCI CE Hour

This course was designed to remove the intimidation factor for subcontractors and product professionals by demystifying the LEED process. We begin with an overview of LEED and the different construction plans and procedures required, present recommendations for selecting products, then conclude with examples of how to properly complete LEED documentation.

Module 1: Overview of LEED

As an overview of the seven LEED Credit categories, we will identify the two key categories for construction professionals. It also highlights the updates to LEED for New Construction and the reference materials available for further research.

Module 2: Construction Activity Plans & Procedures

This module focuses on three main credits: SSp1 Construction Activity Pollution Prevention Plan, EAp1 Fundamental Commissioning & EAc3 Enhanced Commissioning, MRc2 Construction Waste Management and IEQc3 Construction IAQ Management Plan. Learn best practices for these Credits as they relate to subcontractors, subcontractor management and see examples of good and bad documentation.

Module 3: Selecting Materials

This module will help you understand the importance of how to define pre-consumer and post-consumer recyclables in the Materials & Resources category. Learn about rapidly renewable materials, responsible wood and regional sourcing, and how to complete the materials value calculations required by LEED. We will also discuss the Subcontractor’s responsibilities on a LEED project and how to select products that comply with the Indoor Environmental Quality Credits.

Module 4: Documentation

This module will focus on documentation best practices. Learn how to highlight pertinent information while ensuring the product data actually has the information needed, not jargon about LEED points. Typical collection processes will be explained while showing examples of passing and failing documentation.

Material Strategies that Work for LEED

Material Strategies -

that Work for LEED

Made possible through a strategic partnership with:

Green Ideas - Environmental Education

2.0 GBCI CE Hours

Review the current LEED for New Construction Rating system, the key Materials & Resources Credit requirements and strategies to identify before and during the buyout of materials, and review an actual LEED Platinum case study. Participants will gain an understanding of the information required to successfully document material costs and contributing product data, with tips and strategies to reduce the documentation burden on their projects.

Module 1: LEED 2009 Updates

As an overview of the seven LEED Credit categories, this module identifies the two key categories for construction professionals. It highlights the updates to LEED for New Construction and the reference materials available for further research.

Module 2: Material Strategies that work

This module highlights the five key strategies for success by focusing on best practices for building reuse and waste diversion. Learn how to calculate “Materials Value” for LEED Credits, understand material buy-out strategies, and considerations in using low-emitting materials. Additionally, there will be a review of good and bad documentation.

Module 3: Case Study

This module analyzes Northern Arizona University’s Applied Research and Development project. Learn how material strategies helped this project earn LEED Platinum Certification, making it one of the most advanced laboratories in the world. Discover how the project team recycled 100% of the concrete formwork and the challenges and strategies of working with concrete in a cold climate.

Module 4: Conclusion

This final module illustrates how an integrated materials strategy can lead to a successful LEED Certified project. The main topics covered throughout the course will be highlighted, focusing on the relevant points to help you succeed on your next project. 

Senior Executive Leadership Conference

2012 and Beyond—Managing a Construction Enterprise
The “New Normal” Economic Realities Defined

A must for construction professionals intent on proactively positioning their organization to prosper during the recovery. The long term recession is reshaping the very core of the construction industry and changing the marketplace to the extent that established business strategies must be redefined. Capitalizing on the new realities requires a clear and accurate understanding of the changes that have already occurred, those that are in process, and those projected in the near future. This graduate level leadership workshop defines the latest business developments including evolving delivery methods, industry consolidation, exit strategies and more. More significantly, briefings from the Alliance for Construction Excellence Think Tanks will provide innovative, timely, and immediately applicable information that will allow participants to stay ahead of competitors. The information and confidence gained through this conference will reduce uncertainty and the stress of dealing in this complicated market, and will enable you to get ahead and stay ahead.

Sessions and Topics:

• Evolving Delivery Methods
• Industry Consolidation
• Exit Strategies
• Recovery Timing
• Growth Markets
• Declining Markets
• Balance Sheet Realities
• Maintaining Bond Lines
• Bank Lending Ambiguities
• Sustaining Strategies
• Turn-around strategies
• Survival Strategies